Steel 1.2842 - 5 x 30 x 675 mm

Not rated
Tool steel 1.2842 (K720, O2, 90MnCrV8) suitable for knife blades, chisels and other cutting tools. Also suitable for the production of damask steel as a light component.
The item has been sold out…
Availability Temporarily unavailable
Delivery to:
02/04/2024
Code: NOXX12842X05000300675
€13.27 €10.97 excl. VAT
Steel 1.2842 - 5 x 30 x 675 mm
Not rated
Free shipping
Discount on shipping
when purchasing over 150 EUR
Delivery across the EU
Delivery across the EU
we deliver all over europe
Thousands of delivery points
Thousands of delivery points
thanks to extensive delivery methods

Steel 1.2842, 5 x 30 x 675 mm

Manganese - chrome - vanadium steel with medium hardenability, for hardening in oil. Excellent dimensional stability during hardening, good wear resistance, excellent cutting properties.
It is well polished, metal, welded and machined well in the annealed state.
Suitable for the production of tools for cutting and sawing. E.g. knife blades, carving chisels, etc.
Also suitable for the production of damask steel - light component.

Heat treatment of tool steel 1.2842

Fittings: 850 - 1050 °C
Soft annealing: 680 - 720 °C
Hardening: 740 - 820 °C
Tempering: 150 - 250 °C
Achieved hardness: 58 - 63 HRC

Chemical composition and other designations of tool steel 1.2842

Chemical composition: C 0.9; Cr 0.4; Mn 2; V0.1; Si 0.3
Other designations: 1.2842, 90MnCrV8, K720, O2

Supplied material

The material is delivered in annealed condition.
There may be scale or surface corrosion on the surface.
Some material may be descaled by sandblasting at the factory.
Depending on the production technology, the material may not be perfectly flat.
Microcracks may be present on the surface of the material during production, therefore it is recommended to grind from the top layer approx. 0.1 - 0.15 mm.
The material is divided by a water jet, laser technology or a band saw.
In the case of laser cutting of the material, the edge may be turbid after cutting, so when subsequently cutting the material with a band saw, use a weak edge structure to grind it so as not to dull the saw band.
We will send the chemical composition of the specific purchased steel, upon request.

Dimensional tolerances

Material thickness tolerance: +/- 0.28 mm
Material width tolerance: +/- 1.0 mm
Material length tolerance: +/- 3.0 mm

Another steel for the blades

You can find other steel for the blades in the category Knife steel.

Grinding and sharpening of cutlery and blades

Standard sanding belts with ceramic grain can be used for grinding steel, eg 3M 777F, Norton R976, VSM XK870X, Deerfos PS999, or sanding belts with premium ceramic grain, eg 3M Cubitron II 984F, 3M Cubitron II 784F, Norton R980, Deerfos Bora7. Sanding belts 3M Trizact 237AA, 3M Trizact 337DC, Norton NORaX U254, VSM KK712X, VSM KK772J and others can be used for sharpening and polishing blades.

Additional parameters

Category: Knife steel 1.2842
Warranty: 24 months
Length: 675
Designation: 1.2842
Distribution: Carbon
Width: 30
Thickness: 5
The item has been sold out…

Be the first who will post an article to this item!

Do not fill out this field:

Alternative products

Steel 1.2842 - 5 x 30 x 1000 mm
€19.83

Tool steel 1.2842 (K720, O2, 90MnCrV8) suitable for knife blades, chisels and other cutting tools. Also suitable for the production of damask steel as a light component.

Code: NOXX12842X05000301000
Steel 1.2842 - 5 x 30 x 1100 mm
€21.96

Tool steel 1.2842 (K720, O2, 90MnCrV8) suitable for knife blades, chisels and other cutting tools. Also suitable for the production of damask steel as a light component.

Code: NOXX12842X05000301100
Steel 1.2842 - 5 x 30 x 250 mm
€4.90

Tool steel 1.2842 (K720, O2, 90MnCrV8) suitable for knife blades, chisels and other cutting tools. Also suitable for the production of damask steel as a light component.

Code: NOXX12842X05000300250
Steel 1.2842 - 5 x 30 x 300 mm
Steel 1.2842 - 5 x 30 x 300 mm
Temporarily unavailable
€6

Tool steel 1.2842 (K720, O2, 90MnCrV8) suitable for knife blades, chisels and other cutting tools. Also suitable for the production of damask steel as a light component.

Code: NOXX12842X05000300300
Steel 1.2842 - 5 x 30 x 315 mm
Steel 1.2842 - 5 x 30 x 315 mm
Temporarily unavailable
€6.24

Tool steel 1.2842 (K720, O2, 90MnCrV8) suitable for knife blades, chisels and other cutting tools. Also suitable for the production of damask steel as a light component.

Code: NOXX12842X05000300315
Steel 1.2842 - 5 x 30 x 335 mm
€6.40

Tool steel 1.2842 (K720, O2, 90MnCrV8) suitable for knife blades, chisels and other cutting tools. Also suitable for the production of damask steel as a light component.

Code: NOXX12842X05000300335
Steel 1.2842 - 5 x 30 x 360 mm
Steel 1.2842 - 5 x 30 x 360 mm
Temporarily unavailable
€7.35

Tool steel 1.2842 (K720, O2, 90MnCrV8) suitable for knife blades, chisels and other cutting tools. Also suitable for the production of damask steel as a light component.

Code: NOXX12842X05000300360
Steel 1.2842 - 5 x 30 x 500 mm
€9.95

Tool steel 1.2842 (K720, O2, 90MnCrV8) suitable for knife blades, chisels and other cutting tools. Also suitable for the production of damask steel as a light component.

Code: NOXX12842X05000300500