ČeštinaAngličtina
0.00 €
0
 
 
 

Steel D2, 3 mm

  • Product code:NOXXD2X03000000000
     
  • Price from:5.08 €
     
  •  
    Knife steel D2 (K110, 1.2379, X153CrMoV12)
     

    Product variants

    Name of goodsThe Availability Of Our price  
    Knife steel D2 (K110, 1.2379, X153CrMoV12)
    Knife steel D2 (K110, 1.2379, X153CrMoV12)
    Steel D2, 3 x 30 x 1000 mm
    In stock20.34 € / ks 
    without VAT 16.81 € / ks  
    ks
    Knife steel D2 (K110, 1.2379, X153CrMoV12)
    Knife steel D2 (K110, 1.2379, X153CrMoV12)
    Steel D2, 3 x 35 x 1000 mm
    In stock23.05 € / ks 
    without VAT 19.05 € / ks  
    ks
    Knife steel D2 (K110, 1.2379, X153CrMoV12)
    Knife steel D2 (K110, 1.2379, X153CrMoV12)
    Steel D2, 3 x 45 x 250 mm
    In stock7.42 € / ks 
    without VAT 6.13 € / ks  
    ks
    Knife steel D2 (K110, 1.2379, X153CrMoV12)
    Knife steel D2 (K110, 1.2379, X153CrMoV12)
    Steel D2, 3 x 45 x 700 mm
    In stock20.76 € / ks 
    without VAT 17.16 € / ks  
    ks
    Knife steel D2 (K110, 1.2379, X153CrMoV12)
    Knife steel D2 (K110, 1.2379, X153CrMoV12)
    Steel D2, 3 x 50 x 250 mm
    In stock7.88 € / ks 
    without VAT 6.51 € / ks  
    ks
    Knife steel D2 (K110, 1.2379, X153CrMoV12)
    Knife steel D2 (K110, 1.2379, X153CrMoV12)
    Steel D2, 3 x 100 x 1000 mm
    In stock59.07 € / ks 
    without VAT 48.82 € / ks  
    ks
     
     

    Steel D2, 3 mm

    Highly alloyed chromium - molybdenum - vanadium steel with high wear resistance. Tool steel with high hardness, excellent hardenability, dimensionally stable during heat treatment, excellent cutting properties of tools, increased corrosion resistance due to high chromium content. Hardenable in air and vacuum. Excellent also as cutlery steel.

    Heat treatment of tool steel D2

    Forming temperature: 850-1050 ° C
    Hardening: 1020-1080 ° C
    Tempering: 100 - 500 ° C
    Achieved hardness: 58-63 HRC

    Chemical composition and other designations of tool steel D2

    Chemical composition: C 1.55; Cr 11.3; Mn 0.3; Mo 0.75; Si 0.3; V 0.75
    Other designations: 1.2379, X153CrMoV12

    Supplied material

    The material is delivered in annealed condition.
    There may be scale or surface corrosion on the surface.
    Some material may be descaled by sandblasting at the factory.
    Depending on the production technology, the material may not be perfectly flat.
    Microcracks may be present on the surface of the material during production, therefore it is recommended to grind from the top layer approx. 0.1 - 0.15 mm.
    The material is divided by a water jet, laser technology or a band saw.
    In the case of laser cutting of the material, the edge may be turbid after cutting, so when subsequently cutting the material with a band saw, use a weak edge structure to grind it so as not to dull the saw band.
    We will send a steel certificate on request.

    Dimensional tolerances

    Material thickness tolerance: +/- 0.28 mm
    Material width tolerance: +/- 1.0 mm
    Material length tolerance: +/- 3.0 mm

    Another steel for the blades

    You can find other steel for the blades in the category Knife steel.

    Grinding and sharpening of cutlery and blades

    Standard sanding belts with ceramic grain can be used for grinding steel, eg 3M 777F, Norton R976, VSM XK870X, Deerfos PS999, or sanding belts with premium ceramic grain, eg 3M Cubitron II 984F, 3M Cubitron II 784F, Norton R980, Deerfos Bora7. Sanding belts 3M Trizact 237AA, 3M Trizact 337DC, Norton NORaX U254, VSM KK712X, VSM KK772J and others can be used for sharpening and polishing blades.

     
    Do you have any questions on this item? Do not hesitate and ask us.
    *
     
     
    *

    Regenerate
    Kontrolni kod
     
     
    Shopping cart

    Shopping cart is empty

    Last viewed items
    Currency

    Indicative exchange rate:
    EUR  (1 EUR) 23.6 Kč

     
    ČeštinaAngličtina
    0
    Currency

    Indicative exchange rate:
    EUR  (1 EUR) 23.6 Kč

     
    © Truhlaříme.cz