0.00 €

Steel 54SiCr6, 5 x 300 x 500 mm

  • Variant of Steel 54SiCr6, 5 mm 
  • Product code:NOXX54SiCr6X05003000500
  • Availability:In stock
  • Our price without VAT:47.36 € / ks
  • Our price with VAT 21%:57.30 €
  •  ks 
    Knife steel 54SiCr6 (1.7102)

    Product variants

    Name of goodsThe Availability Of Our price  
    Knife steel 54SiCr6 (1.7102)
    Knife steel 54SiCr6 (1.7102)
    Steel 54SiCr6, 5 x 30 x 700 mm
    In stock9.23 € / ks 
    without VAT 7.63 € / ks  
    Knife steel 54SiCr6 (1.7102)
    Knife steel 54SiCr6 (1.7102)
    Steel 54SiCr6, 5 x 300 x1000 mm
    In stock113.59 € / ks 
    without VAT 93.88 € / ks  

    Steel 54SiCr6, 5 x 300 x 500 mm

    Special structural steel for the production of springs and other extremely stressed mechanical parts. The thermally and mechanically processed material has high strength, flexibility, hardness and toughness. Due to its properties, it is also suitable for the production of knives, machetes and, above all, long sword blades.
    Recommended values ​​for hardening knives are 52 - 58 HRC, long blades 50 - 54 HRC.

    Heat treatment of tool steel 54SiCr6

    Forming temperature: 850 - 1100 ° C
    Soft annealing: 700 - 740 ° C
    Hardening: 800 - 830 ° C
    Tempering: 340 - 410 ° C, for knife blades 200 - 280 ° C
    Achieved hardness: 58 HRC

    Chemical composition and other designations of tool steel 54SiCr6

    Chemical composition: C 0.55; Cr 0.6; Mn 0.6; Si 1.4
    Other designation: 1.7102, 54SiCr6

    Supplied material

    The material is delivered in annealed condition.
    There may be scale or surface corrosion on the surface.
    Some material may be descaled by sandblasting at the factory.
    Depending on the production technology, the material may not be perfectly flat.
    Microcracks may be present on the surface of the material during production, therefore it is recommended to grind from the top layer approx. 0.1 - 0.15 mm.
    The material is divided by a water jet, laser technology or a band saw.
    In the case of laser cutting of the material, the edge may be turbid after cutting, so when subsequently cutting the material with a band saw, use a weak edge structure to grind it so as not to dull the saw band.
    We will send a steel certificate on request.

    Dimensional tolerances

    Material thickness tolerance: +/- 0.28 mm
    Material width tolerance: +/- 1.0 mm
    Material length tolerance: +/- 3.0 mm

    Another steel for the blades

    You can find other steel for the blades in the category Knife steel.

    Grinding and sharpening of cutlery and blades

    Standard sanding belts with ceramic grain can be used for grinding steel, eg 3M 777F, Norton R976, VSM XK870X, Deerfos PS999, or sanding belts with premium ceramic grain, eg 3M Cubitron II 984F, 3M Cubitron II 784F, Norton R980, Deerfos Bora7. Sanding belts 3M Trizact 237AA, 3M Trizact 337DC, Norton NORaX U254, VSM KK712X, VSM KK772J and others can be used for sharpening and polishing blades.

    Do you have any questions on this item? Do not hesitate and ask us.

    Kontrolni kod
    Shopping cart

    Shopping cart is empty


    Indicative exchange rate:
    EUR  (1 EUR) 23.717 Kč


    Indicative exchange rate:
    EUR  (1 EUR) 23.717 Kč

    © Truhlaříme.cz