ČeštinaAngličtina
0.00 €
0
 
 
 

Steel N690, 2.5 x 45 x 1000 mm

  • Variant of Steel N690, 2.5 mm 
     
  • Product code:NOXXN690X02500451000
     
  • Availability:In stock
     
  • Our price without VAT:31.36 € / ks
     
  • Our price with VAT 21%:37.95 €
     
  •  ks 
     
    Knife steel N690
    Knife steel N690
    Knife steel N690
     

    Product variants

    Name of goodsThe Availability Of Our price  
    Knife steel N690
    Knife steel N690
    Steel N690, 2.5 x 45 x 250 mm
    In stock9.49 € / ks 
    without VAT 7.84 € / ks  
    ks
    Knife steel N690
    Knife steel N690
    Steel N690, 2.5 x 45 x 700 mm
    In stock26.56 € / ks 
    without VAT 21.95 € / ks  
    ks
    Knife steel N690
    Knife steel N690
    Steel N690, 2.5 x 100 x 500 mm
    In stock37.48 € / ks 
    without VAT 30.98 € / ks  
    ks
    Knife steel N690
    Knife steel N690
    Steel N690, 2.5 x 100 x 1000 mm
    In stock74.84 € / ks 
    without VAT 61.85 € / ks  
    ks
     
     

    Steel N690, 2.5 x 45 x 1000 mm

    Stainless steel from the Austrian manufacturer Böhler with a high carbon content, enriched with cobalt. After hardening, it creates a very durable blade with high durability. It is suitable for the production of kitchen, hunting and outdoor knives, it is also used for the production of surgical cutting tools and disc knives in the meat industry. It has excellent flexibility and hardness, 58 to 60 HRC. The material is well machined, easy to sharpen, requires almost no additional maintenance.

    Heat treatment of stainless steel N690

    Hardening: 1000-1050 ° C
    Tempering: 100 - 300 ° C
    Achieved hardness: 58-60 HRC

    Chemical composition and other designations of stainless steel N690

    Chemical composition: C 1.08; Co 1.5; Cr 17.3; Mn 0.4; Mo 1.1; Si 0.4; V 0.1
    Additional designation: 1.4528

    Supplied material

    The material is delivered in annealed condition.
    There may be scale or surface corrosion on the surface.
    Some material may be descaled by sandblasting at the factory.
    Depending on the production technology, the material may not be perfectly flat.
    Microcracks may be present on the surface of the material during production, therefore it is recommended to grind from the top layer approx. 0.1 - 0.15 mm.
    The material is divided by a water jet, laser technology or a band saw.
    In the case of laser cutting of the material, the edge may be turbid after cutting, so when subsequently cutting the material with a band saw, use a weak edge structure to grind it so as not to dull the saw band.
    We will send a steel certificate on request.

    Dimensional tolerances

    Material thickness tolerance: +/- 0.28 mm
    Material width tolerance: +/- 1.0 mm
    Material length tolerance: +/- 3.0 mm

    Another steel for the blades

    You can find other steel for the blades in the category Knife steel.

    Grinding and sharpening of cutlery and blades

    Standard sanding belts with ceramic grain can be used for grinding steel, eg 3M 777F, Norton R976, VSM XK870X, Deerfos PS999, or sanding belts with premium ceramic grain, eg 3M Cubitron II 984F, 3M Cubitron II 784F, Norton R980, Deerfos Bora7. Sanding belts 3M Trizact 237AA, 3M Trizact 337DC, Norton NORaX U254, VSM KK712X, VSM KK772J and others can be used for sharpening and polishing blades.

     

     
    Knife steel N690 Steel N690, 2.5 x 45 x 1000 mm
    Knife steel N690 Steel N690, 2.5 x 45 x 1000 mm
     
    Do you have any questions on this item? Do not hesitate and ask us.
    *
     
     
    *

    Regenerate
    Kontrolni kod
     
     
    Shopping cart

    Shopping cart is empty

    Currency

    Indicative exchange rate:
    EUR  (1 EUR) 23.717 Kč

     
    ČeštinaAngličtina
    0
    Currency

    Indicative exchange rate:
    EUR  (1 EUR) 23.717 Kč

    602050062
     
    © Truhlaříme.cz